» Connect - Agent HTTP API

The /agent/connect endpoints interact with Connect with agent-local operations.

These endpoints may mirror the non-agent Connect endpoints in some cases. Almost all agent-local Connect endpoints perform local caching to optimize performance of Connect without having to make requests to the server.

» Authorize

This endpoint tests whether a connection attempt is authorized between two services. This is the primary API that must be implemented by proxies or native integrations that wish to integrate with Connect. Prior to calling this API, it is expected that the client TLS certificate has been properly verified against the current CA roots.

The implementation of this API uses locally cached data and doesn't require any request forwarding to a server. Therefore, the response typically occurs in microseconds to impose minimal overhead on the connection attempt.

Method Path Produces
POST /agent/connect/authorize application/json

The table below shows this endpoint's support for blocking queries, consistency modes, and required ACLs.

Blocking Queries Consistency Modes ACL Required
NO none service:write

» Parameters

  • Target (string: <required>) - The name of the service that is being requested.

  • ClientCertURI (string: <required>) - The unique identifier for the requesting client. This is currently the URI SAN from the TLS client certificate.

  • ClientCertSerial (string: <required>) - The colon-hex-encoded serial number for the requesting client cert. This is used to check against revocation lists.

» Sample Payload

{
  "Target": "db",
  "ClientCertURI": "spiffe://dc1-7e567ac2-551d-463f-8497-f78972856fc1.consul/ns/default/dc/dc1/svc/web",
  "ClientCertSerial": "04:00:00:00:00:01:15:4b:5a:c3:94"
}

» Sample Request

$ curl \
   --request POST \
   --data @payload.json \
    https://consul.rocks/v1/agent/connect/authorize

» Sample Response

{
  "Authorized": true,
  "Reason": "Matched intention: web => db (allow)"
}

» Certificate Authority (CA) Roots

This endpoint returns the trusted certificate authority (CA) root certificates. This is used by proxies or native integrations to verify served client or server certificates are valid.

This is equivalent to the non-Agent Connect endpoint, but the response of this request is cached locally at the agent. This allows for very fast response times and for fail open behavior if the server is unavailable. This endpoint should be used by proxies and native integrations.

Method Path Produces
GET /agent/connect/ca/roots application/json

The table below shows this endpoint's support for blocking queries, consistency modes, and required ACLs.

Blocking Queries Consistency Modes ACL Required
YES all none

» Sample Request

$ curl \
   https://consul.rocks/v1/connect/ca/roots

» Sample Response

{
  "ActiveRootID": "15:bf:3a:7d:ff:ea:c1:8c:46:67:6c:db:b8:81:18:36:ad:e5:d0:c7",
  "Roots": [
    {
      "ID": "15:bf:3a:7d:ff:ea:c1:8c:46:67:6c:db:b8:81:18:36:ad:e5:d0:c7",
      "Name": "Consul CA Root Cert",
      "SerialNumber": 7,
      "SigningKeyID": "31:66:3a:39:31:3a:63:61:3a:34:31:3a:38:66:3a:61:63:3a:36:37:3a:62:66:3a:35:39:3a:63:32:3a:66:61:3a:34:65:3a:37:35:3a:35:63:3a:64:38:3a:66:30:3a:35:35:3a:64:65:3a:62:65:3a:37:35:3a:62:38:3a:33:33:3a:33:31:3a:64:35:3a:32:34:3a:62:30:3a:30:34:3a:62:33:3a:65:38:3a:39:37:3a:35:62:3a:37:65",
      "NotBefore": "2018-05-21T16:33:28Z",
      "NotAfter": "2028-05-18T16:33:28Z",
      "RootCert": "-----BEGIN CERTIFICATE-----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\nfs2hBxWIELGwTAIgLdO7RRw+z9nnxCIA6kNl//mIQb+PGItespiHZKAz74Q=\n-----END CERTIFICATE-----\n",
      "IntermediateCerts": null,
      "Active": true,
      "CreateIndex": 8,
      "ModifyIndex": 8
    }
  ]
}

» Service Leaf Certificate

This endpoint returns the leaf certificate representing a single service. This certificate is used as a server certificate for accepting inbound connections and is also used as the client certificate for establishing outbound connections to other services.

The agent generates a CSR locally and calls the CA sign API to sign it. The resulting certificate is cached and returned by this API until it is near expiry or the root certificates change.

This API supports blocking queries. The blocking query will block until a new certificate is necessary because the existing certificate will expire or the root certificate is being rotated. This blocking behavior allows clients to efficiently wait for certificate rotations.

Method Path Produces
GET /agent/connect/ca/leaf/:service application/json

The table below shows this endpoint's support for blocking queries, consistency modes, and required ACLs.

Blocking Queries Consistency Modes ACL Required
YES all service:write

» Parameters

  • Service (string: <required>) - The name of the service for the leaf certificate. This is specified in the URL. The service does not need to exist in the catalog, but the proper ACL permissions must be available.

» Sample Request

$ curl \
   https://consul.rocks/v1/connect/ca/leaf/web

» Sample Response

{
  "SerialNumber": "08",
  "CertPEM": "-----BEGIN CERTIFICATE-----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\nOM/X3Yc1xb/qJiiEVzXcaz3oVFULOzrNAwk=\n-----END CERTIFICATE-----\n",
  "PrivateKeyPEM": "-----BEGIN EC PRIVATE KEY-----\nMHcCAQEEIAOGglbwY8HdD3LFX6Bc94co2pzeFTto8ebWoML5E+QfoAoGCCqGSM49\nAwEHoUQDQgAEl0upEp3VJHJwU4Vx4wc4FkpBbwcc7yNnkLx1GzAP4jBN3+i0k+Jo\n+tXMY4CLgyxoRSAMx6a83WOLLAe3cgjTyQ==\n-----END EC PRIVATE KEY-----\n",
  "Service": "web",
  "ServiceURI": "spiffe://11111111-2222-3333-4444-555555555555.consul/ns/default/dc/dc1/svc/web",
  "ValidAfter": "2018-05-21T16:33:28Z",
  "ValidBefore": "2018-05-24T16:33:28Z",
  "CreateIndex": 5,
  "ModifyIndex": 5
}
  • SerialNumber string - Monotonically increasing 64-bit serial number representing all certificates issued by this Consul cluster.

  • CertPEM (string) - The PEM-encoded certificate.

  • PrivateKeyPEM (string) - The PEM-encoded private key for this certificate.

  • Service (string) - The name of the service that this certificate identifies.

  • ServiceURI (string) - The URI SAN for this service.

  • ValidAfter (string) - The time after which the certificate is valid. Used with ValidBefore this can determine the validity period of the certificate.

  • ValidBefore (string) - The time before which the certificate is valid. Used with ValidAfter this can determine the validity period of the certificate.

» Managed Proxy Configuration

This endpoint returns the configuration for a managed proxy. Ths endpoint is only useful for managed proxies and not relevant for unmanaged proxies.

Managed proxy configuration is set in the service definition. When Consul starts the managed proxy, it provides the service ID and ACL token. The proxy is expected to call this endpoint to retrieve its configuration. It may use a blocking query to detect any configuration changes.

Method Path Produces
GET /agent/connect/proxy/:id application/json

The table below shows this endpoint's support for blocking queries, consistency modes, and required ACLs.

Blocking Queries Consistency Modes ACL Required
YES all service:write, proxy token

» Parameters

  • ID (string: <required>) - The ID (not the name) of the proxy service in the local agent catalog. For managed proxies, this is provided in the CONSUL_PROXY_ID environment variable by Consul.

» Sample Request

$ curl \
   https://consul.rocks/v1/connect/proxy/web-proxy

» Sample Response

{
  "ProxyServiceID": "web-proxy",
  "TargetServiceID": "web",
  "TargetServiceName": "web",
  "ContentHash": "cffa5f4635b134b9",
  "ExecMode": "daemon",
  "Command": [
    "/usr/local/bin/consul",
    "connect",
    "proxy"
  ],
  "Config": {
    "bind_address": "127.0.0.1",
    "bind_port": 20199,
    "local_service_address": "127.0.0.1:8181"
  }
}
  • ProxyServiceID string - The ID of the proxy service.

  • TargetServiceID (string) - The ID of the target service the proxy represents.

  • TargetServiceName (string) - The name of the target service the proxy represents.

  • ContentHash (string) - The content hash of the response used for hash-based blocking queries.

  • ExecMode (string) - The execution mode of the managed proxy.

  • Command (array<string>) - The command for the managed proxy.

  • Config (map<string|any>) - The configuration for the managed proxy. This is a map of primitive values (including arrays and maps) that is set by the user.