» [Enterprise] Multiple Datacenters: Advanced Federation with Network Areas
The network area functionality described here is available only in Consul Enterprise version 0.8.0 and later.
One of the key features of Consul is its support for multiple datacenters. The architecture of Consul is designed to promote a low coupling of datacenters so that connectivity issues or failure of any datacenter does not impact the availability of Consul in other datacenters. This means each datacenter runs independently, each having a dedicated group of servers and a private LAN gossip pool.
This guide covers the advanced form of federating Consul clusters using the new network areas capability added in Consul Enterprise version 0.8.0. For the basic form of federation available in the open source version of Consul, please see the Basic Federation Guide for more details.
» Network Area Overview
Consul's Basic Federation support relies on all Consul servers in all datacenters having full mesh connectivity via server RPC (8300/tcp) and Serf WAN (8302/tcp and 8302/udp). Securing this setup requires TLS in combination with managing a gossip keyring. With massive Consul deployments, it becomes tricky to support a full mesh with all Consul servers, and to manage the keyring.
Consul Enterprise version 0.8.0 added support for a new federation model based on operator-created network areas. Network areas specify a relationship between a pair of Consul datacenters. Operators create reciprocal areas on each side of the relationship and then join them together, so a given Consul datacenter can participate in many areas, even when some of the peer areas cannot contact each other. This allows for more flexible relationships between Consul datacenters, such as hub/spoke or more general tree structures. Traffic between areas is all performed via server RPC (8300/tcp) so it can be secured with just TLS.
Currently, Consul will only route RPC requests to datacenters it is immediately adjacent to via an area (or via the WAN), but future versions of Consul may add routing support.
The following can be used to manage network areas:
» Network Areas and the WAN Gossip Pool
Networks areas can be used alongside the Consul's Basic Federation model and the WAN gossip pool. This helps ease migration, and clusters like the primary datacenter are more easily managed via the WAN because they need to be available to all Consul datacenters.
A peer datacenter can connected via the WAN gossip pool and a network area at the same time, and RPCs will be forwarded as long as servers are available in either.
» Configure Advanced Federation
To get started, follow the Deployment guide to
start each datacenter. After bootstrapping, we should have two datacenters now which
we can refer to as
dc2. Note that datacenter names are opaque to Consul;
they are simply labels that help human operators reason about the Consul clusters.
» Create Areas in both Datacenters
A compatible pair of areas must be created in each datacenter:
(dc1) $ consul operator area create -peer-datacenter=dc2 Created area "cbd364ae-3710-1770-911b-7214e98016c0" with peer datacenter "dc2"!
(dc2) $ consul operator area create -peer-datacenter=dc1 Created area "2aea3145-f1e3-cb1d-a775-67d15ddd89bf" with peer datacenter "dc1"!
Now you can query for the members of the area:
(dc1) $ consul operator area members Area Node Address Status Build Protocol DC RTT cbd364ae-3710-1770-911b-7214e98016c0 node-1.dc1 127.0.0.1:8300 alive 0.8.0_entrc1 2 dc1 0s
» Join Servers
Consul will automatically make sure that all servers within the datacenter where the area was created are joined to the area using the LAN information. We need to join with at least one Consul server in the other datacenter to complete the area:
(dc1) $ consul operator area join -peer-datacenter=dc2 127.0.0.2 Address Joined Error 127.0.0.2 true (none)
With a successful join, we should now see the remote Consul servers as part of the area's members:
(dc1) $ consul operator area members Area Node Address Status Build Protocol DC RTT cbd364ae-3710-1770-911b-7214e98016c0 node-1.dc1 127.0.0.1:8300 alive 0.8.0_entrc1 2 dc1 0s cbd364ae-3710-1770-911b-7214e98016c0 node-2.dc2 127.0.0.2:8300 alive 0.8.0_entrc1 2 dc2 581.649µs
» Route RPCs
Now we can route RPC commands in both directions. Here's a sample command to set a KV entry in dc2 from dc1:
(dc1) $ consul kv put -datacenter=dc2 hello world Success! Data written to: hello
» DNS Lookups
The DNS interface supports federation as well:
(dc1) $ dig @127.0.0.1 -p 8600 consul.service.dc2.consul ; <<>> DiG 9.8.3-P1 <<>> @127.0.0.1 -p 8600 consul.service.dc2.consul ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 49069 ;; flags: qr aa rd; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; WARNING: recursion requested but not available ;; QUESTION SECTION: ;consul.service.dc2.consul. IN A ;; ANSWER SECTION: consul.service.dc2.consul. 0 IN A 127.0.0.2 ;; Query time: 3 msec ;; SERVER: 127.0.0.1#8600(127.0.0.1) ;; WHEN: Wed Mar 29 11:27:35 2017 ;; MSG SIZE rcvd: 59
There are a few networking requirements that must be satisfied for this to work. Of course, all server nodes must be able to talk to each other via their server RPC ports (8300/tcp). If service discovery is to be used across datacenters, the network must be able to route traffic between IP addresses across regions as well. Usually, this means that all datacenters must be connected using a VPN or other tunneling mechanism. Consul does not handle VPN or NAT traversal for you.
provides a basic address rewriting capability.
» Data Replication
In general, data is not replicated between different Consul datacenters. When a request is made for a resource in another datacenter, the local Consul servers forward an RPC request to the remote Consul servers for that resource and return the results. If the remote datacenter is not available, then those resources will also not be available, but that won't otherwise affect the local datacenter. There are some special situations where a limited subset of data can be replicated, such as with Consul's built-in ACL replication capability, or external tools like consul-replicate.
In this guide, you setup advanced federation using network areas. You then learned how to route RPC commands and use the DNS interface with multiple datacenters.